ROI Calculator

See how much Snapdrill saves on your next job

Takes 60 seconds. Tell us how you currently make branch connections for your fire sprinkler systems — we'll show you exact savings and payback time.

Step 1 of 3

How do you make branch connections for your fire sprinkler systems?

Select your existing method — we'll compare it directly against Snapdrill.

🔨

Hand drill + Mechanical T

10–15 min / connection

Manual hole saw on pipe, fit mechanical tee. Varies by pipe schedule and diameter.

⚙️

Threading machine + Threaded T

15 min / connection

Cut, ream, thread, tape, screw fitting. Requires 100 kg machine, oil, metal shavings.

🏭

Prefabricated welded outlets

€30–100 / outlet

Buy pre-welded branch lines from supplier. High material cost, zero on-site flexibility, and the fabricator keeps the margin.

⚡ Snapdrill: 2 min / connection · clean · quiet · no setup

Step 2 of 3

Tell us about your project

We use all-in labor rates (base wage + social charges + employer overhead) for each region.

Region—

Pipe schedule & material

Branch connections on this project

Calculation based on an entry-level kit: one Snapdrill unit + 2 hole saws, approx. €2,000. All figures are indicative guidelines to visualize potential savings — actual results depend on your specific project conditions.

Your results

Here's what Snapdrill saves you

Proven in the field

Contractors worldwide have already made the switch

Five years. Thousands of jobs. From small crews to the largest mechanical contractors in Europe.

5×

Faster than threading

400

Holes per saw

50%

Cost saving vs. prefab

"Snapdrill delivers faster, safer and more ergonomic installation — even the sceptical old-timers love it. Fitters report cleaner, perfectly centered holes and far less strain."

Bravida — Sweden's largest mechanical contractor

"Two fitters installed 250 Mechanical Ts per 8-hour workday with zero downtime — less strain, less pain, on a 500,000+ sq ft ESFR project."

Encore Fire Protection — New England, USA

"The switch from threaded tees to Mechanical Ts cut installation time from 10 minutes to 2 — tripling daily output and transforming workflows."

Fire NZ — New Zealand

"WSFP paid off their Snapdrill on the first job. The crew finished early, came in under budget, and avoided costly rework."

Western States Fire Protection — Colorado Springs, USA

Why Snapdrill wins

🎯

Self-centering clamp

Precise every time. Reduces injury risk and eliminates off-center holes.

⚡

Automatic feed

No manual pushing. Less fatigue on long shifts.

🔧

2.5 kg handheld

Works overhead and in tight spaces. No setup, no machine to haul.

💎

Tungsten carbide saws

400 holes per saw in SCH10. Significantly lower tool cost per connection.

Hole saw life — cost per hole

Pipe type	Hand drill (€20 saw)	Snapdrill (€80 saw)	Save / hole
SCH10 carbon steel	€1.33 (15 holes)	€0.20 (400 holes)	€1.13
SCH40 carbon steel	€2.00 (10 holes)	€0.40 (200 holes)	€1.60
Stainless steel	€4.00 (5 holes)	€0.53 (150 holes)	€3.47

Ready to drill smarter?

Book a hands-on demo.
From our pro showroom, live — wherever you are.

We drill real pipe in our showroom in real time, so you can see exactly how Snapdrill performs — no matter where in the world you're located.

Norwegian design · Global trust · 5 years of worldwide installs

Calculation methodology

All savings figures are indicative guidelines intended to visualize potential savings. Actual results will vary depending on project conditions, crew experience, pipe size, and site complexity.

Investment basis: Entry-level kit — one Snapdrill unit + 2 hole saws, approx. €2,000. The Complete Standard kit (five machines, batteries, charger, case, 18 hole saws) is priced higher.

Labor rates: All-in rates per region, covering base wage + social charges + employer overhead. Sourced from industry benchmarks for pipefitters and fire sprinkler installers.

Installation times: Snapdrill is benchmarked at 2 minutes per branch connection. Hand drill: 10 min (SCH10), 15 min (SCH40), 12 min (stainless). Threading machine: 15 min per connection. Based on Snapdrill field data across multiple projects.

Hole saw life: Snapdrill tungsten carbide saws — 400 holes (SCH10), 200 holes (SCH40), 150 holes (stainless). Hand drill saws — 15 / 10 / 5 holes respectively. Snapdrill saw €80, hand drill saw €20.

Prefab comparison: Material cost fixed at €15/outlet (pipe ~€10 + mechanical T ~€5). Fitter output 100–250 Mechanical Ts/shift, adjustable in the calculator. Output range is based on third-party case studies and contractor interviews conducted over 5+ years across multiple markets. Prefab pricing €30–€100 based on Tyco, Viking, Victaulic, and local fabricator benchmarks.